Vertical Lifeline Systems
What Is a Vertical Lifeline / Ladder Fall Protection System?
A vertical lifeline is essential safety equipment that provides reliable fall protection on vertical (90°) fixed ladders. Fixed ladders, whether caged or uncaged, carry an inherent risk of falling because of their design. Vertical lifeline systems therefore play a vital role in protecting workers who use them.
Advantages of Ladder Fall Protection Systems
- Maximum Safety: Provides continuous fall protection during both ascent and descent.
- Ease of Use: Practical, ergonomic design for easy, user-friendly operation.
- Durability: Made from long-lasting materials that resist harsh weather conditions.
- Compliance: XTR Safety vertical systems are certified to EN 353-1:2014+A1:2017.
- The specially designed XTR Safety trolley ensures safe and comfortable climbing. The trolley used in the VRT-02 system complies with the latest revision of the lifeline standard.
XTR Safety fall arrest systems comply fully with occupational safety standards and are the ideal solution for maximising safety in high-risk work environments.
Contact us for more information.
25-Year Warranty
XTR Safety fall protection systems are covered by a 25-year manufacturer’s warranty against manufacturing defects (15 years for X-WALK walkways and X-GUARD guardrails).
Stainless Steel & Aluminum
XTR Safety products are made of stainless steel and aluminum with high corrosion resistance.
Insurance
All our manufacturing and installation work is covered by professional liability insurance.
A vertical lifeline is a fall arrest system installed on a fixed structure or on a fixed ladder. It allows the user to climb and descend safely and comfortably, moving freely along the line without having to operate the system manually. Under European Union legislation, vertical lifelines are personal protective equipment: they must carry the CE marking and be tested and certified to EN 353-1:2014+A1:2017.
Vertical lifelines must be used with a trolley that moves up and down without manual adjustment, cannot be detached from the system unintentionally, and locks automatically to arrest the user in the event of a fall.
Vertical lifelines are fall arrest systems designed and certified to EN 353-1:2014+A1:2017. They are available in wire rope and rigid rail versions.
International standards require fall protection on fixed ladders. Under EN ISO 14122-4, fixed ladders above a certain climbing height must be fitted with a fall protection device, either a safety cage or a guided type fall arrester (vertical lifeline). Vertical lifelines must comply with EN 353-1:2014+A1:2017. Employers are responsible for ensuring that a suitable fall protection measure is in place on every fixed ladder used for access at height.
XTR Safety vertical lifelines can be installed on fixed ladders or similar structures that meet the following conditions:
- The ladder must not be inclined more than 15° to either side.
- The structure must be able to withstand a minimum load of 15 kN in order to carry the forces that may occur in a fall.
- In highly corrosive environments (swimming pools, water tanks, waste facilities, areas with acid vapours or hazardous chemicals, extreme heat or cold, etc.), stainless steel products may suffer stress corrosion cracking that is invisible to the eye and reduces their structural strength. In such environments, the installation decision should only be made after the relevant measurements have been taken on site.
Contact the XTR Safety sales team for pricing, product supply and project design for XTR Safety vertical lifelines.
Vertical lifelines are classified as personal protective equipment under European Union legislation. Fixed vertical lifelines certified to EN 353-1:2014+A1:2017 can be installed by the manufacturer, by persons authorised by the manufacturer or by the end user, provided that the manufacturer’s installation manual is followed.




