In sandwich panel and trapezoidal type roofs, if the sheet condition is suitable, anchors with large surface area are fixed directly on the sheet. XTR Safety recommends the use of rivets as fasteners for anchor installation. Smart screws etc. as fasteners. The use of elements may cause problems such as loosening, disassembly and insulation problems in the long term. XTR Safety panel anchors are fixed to roofs with insulated rivets with appropriate resistance.

In roofs where the sheet condition is not suitable, the load-bearing elements under the roof are used for anchoring. In this installation method, the roof is cut to reach the concrete, steel or wooden carriers under the roof and the anchor is fixed to these elements. The anchor fixed to the carrier is removed and left on the roof and re-insulated around it. Careful isolation is extremely important in this method. XTR Safety recommends working with professional insulation companies for this installation method.